DLED4 Series • Light Head and Power Supply • Instruction Manual • V1.1
8
2.1 Intended Use
This device is designed and constructed exclusively for the intended use.
The dedolight LED system serves exclusively the professional illumination of stages and film sets inside buildings
and covered areas.
The intended use includes compliance with all information contained in these instructions.
Each use beyond the intended purposes is considered as misuse.
WARNING! DANGER through misuse!
Misuse of the dedolight LED system can lead to dangerous situations. Misuse includes in particular
● use of the system or its components outdoors / in rain
● using the light head without front lens
● using the light head with damaged cooling fins
● using the components without lighting stand or without proper mounting devices
● using the light head upside down
● use of the dedolight LED system by untrained personnel
Claims of any type due to damage caused by misuse are excluded.
2.2 Operator’s responsibility
The operator is the person who operates the system for commercial or economic purposes, or instructs a third
party to use or apply the equipment.
Obligations of the operator
The system is used in commercial applications. The operator of the system is legally responsible for workplace
safety.
Apart from the safety instructions in this manual, all valid safety rules in the area of application are the responsi-
bility of the operator.
In particular, the following applies:
● The user / operator must be aware of applicable health and safety regulations and the evaluation of
additional hazards, which may be prevalent in the location of application. Suitable operating proce-
dures have to be respected and enforced.
● During the entire service life of the system, the operator must check that operating procedures con-
form with actual validity of rules and regulations, and if necessary adapt the operating instructions
accordingly.
● The operator bears responsibility for installation and operation. He has to regulate and specify oper-
ational procedures as well as maintenance and cleaning procedures.
● The operator has to ensure that all staff dealing with the system have read and understood these
instructions. In addition, he must train and inform the staff in regular intervals about potential Dan-
gers.
● The operator must provide the required protective equipment to the personnel.
Furthermore, the operator is responsible for ensuring that the system is always in a technically per-
fect condition.
Therefore the following shall apply:
● The operator must ensure that the maintenance intervals described in this manual are respected.
● The operator has to make sure that all safety equipment is regularly checked for function and com-
pleteness.
To Next Page
Loading...
