DEEP SEA ELECTRONICS DSEGenset DSE6120 MKIII - Voltage and Frequency Sensing Specifications; Current Sensing Specifications

Specification
057-289 ISSUE: 1
Page 14 of 148
2.6 VOLTAGE & FREQUENCY SENSING
Description
Specification
Measurement Type
True RMS conversion
Sample Rate
40 kHz
Harmonics
Up to 11
th
or better
Input Impedance
450 k phase to neutral
Phase To Neutral
15 V (minimum required for sensing frequency) to 415 V AC
(absolute maximum)
Suitable for 345 V AC nominal
(±20 % for under/overvoltage detection)
Phase To Phase
25 V (minimum required for sensing frequency) to 720 V AC
(absolute maximum)
Suitable for 600 V AC nominal
(±20 % for under/overvoltage detection)
Common Mode Offset From Earth
100 V AC (max)
Resolution
1 V AC phase to neutral
2 V AC phase to phase
Accuracy
±1 % of full scale phase to neutral
±1 % of full scale phase to phase
Minimum Frequency
3.5 Hz
Maximum Frequency
75.0 Hz
Frequency Resolution
0.1 Hz
Frequency Accuracy
±0.2 Hz
2.7 CURRENT SENSING
Description
Specification
Measurement Type
True RMS conversion
Sample Rate
40 kHz
Harmonics
Up to 11
th
or better
Nominal CT Secondary Rating
5 A
Maximum Continuous Current
5 A
Overload Measurement
15 A
Absolute Maximum Overload
50 A for 1 second
Burden
0.5 VA (0.02 R burden resistors)
Common Mode Offset
±1 V peak plant ground to CT common terminal
Resolution
25 mA
Accuracy
±1 % of Nominal (excluding CT error)