-13-
A B
HEAD
A
B
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Removal: For propeller removal, use a screwdriver (provided) to rotate
counter-clockwise and remove the propellers.
Installation:
① An “A” or “B” is printed on the back of each propeller.
② Lock the propellers to the corresponding motor shafts (the motor
shafts are also marked) with a screw.
③ Rotate each screw clockwise.
- The propeller is installed before the drone is packaged at the
factory.
- The drone will not fly unless the correct propeller is installed
on the correct motor shaft.
PREPARATION BEFORE FLIGHT
PROPELLERS
To Next Page
Loading...
