-15-
① Long press the Power Switch
Button to turn on the drone. The
drone indicators start flashing.
② Place the drone on a flat and
level surface, with its head facing
forward and its tail pointing
towards the pilot.
③ Short press the Power Switch to
turn on the transmitter. Once the
transmitter sends out a long beep
and the Power Indicator changes
from blinking to solid, the drone will
be paired with the transmitter.
HEAD
All of the following operations in this manual use MODE 2.
FLIGHT
* If you use the transmitter to control the drone first, the APP will
not be able to control it. Conversely, if you use the APP to control
the drone first, the transmitter and the drone will not be paired.
PAIRING
To Next Page
Loading...
