-24-
ATTITUDE ADJUSTMENT
TRIMMER
The Forward Trim
If the drone tends to drift forward:
1. Press down the ( ) button and do not release it.
2. At the same time, push the right joystick backward one time.
3. Depending on how the drone drifts, it may take several pushes to
balance the drone.
4. After each push, wait 2 seconds to watch the drone's movement. If
it still drifts, push the joystick backward again.
5. Repeat STEP 4 until the drone drifts forward no more.
* You can also fix the Backward/Sideward Trim using a similar
method, i.e., pushing the right joystick to the direction opposite the
drift.
Trim adjustments are designed to counter drifts not caused by
airflow.
To Next Page
Loading...
