What to do if the buttons on my Defender PX301 Security System are not working?
If the buttons on your Defender Security System are not working, ensure you are viewing full screen, as the buttons do not work in quad screen mode. Also, make sure the button lock function on the front of the monitor is not switched on.
Why is the night vision not working on my Defender PX301?
If the night vision on your Defender Security System is not working, it might be because the area has too much light, preventing the sensor from activating. Try the camera in a completely dark environment.
How to adjust brightness on Defender PX301 if picture is too bright or dark?
If the picture on your Defender Security System is too bright or dark, it may be due to excessive light in the camera's environment. Try the camera in a pitch black setting. You can also try adjusting the brightness settings on your monitor.
Why is my Defender Security System footage not recording?
If your Defender Security System footage is not recording, adjust the recording settings. Make sure the SD card is completely inserted into the monitor. Verify that the SD card is not full and that the overwrite function is turned on. Also, ensure the SD card is not locked by adjusting the tab on the side of the card.
How to troubleshoot 'No Audio' on my Defender PX301 Security System?
If you're getting no audio from your Defender Security System, first make sure nothing is interfering with the microphone on the camera. Ensure that whatever you are trying to hear is close enough to the microphone on the camera (within 6ft). Disconnect and reconnect the wires from the camera and the monitor to ensure they are secure. Try re-pairing the camera and monitor. Try adjusting the volume on the monitor and ensure that the camera volume is turned up using the remote. Ensure that the AV cord is connected to the proper connections on the monitor.
What to do if my Defender PX301 remote is not working?
If the Defender Security System remote is not working, first ensure that the remote control has batteries inserted and that they are not dead. Then, try plugging in the IR sensor. Finally, try using the remote control closer to the monitor.
Why my Defender PX301 Security System devices are not pairing?
If your Defender Security System devices are not pairing, make sure the camera and monitor are within 100ft of each other. Try moving the devices closer, as walls or other obstructions can interfere with the signal. Also, ensure that both devices are connected to a proper power source.
How to fix a 'No Picture/Signal' issue on my Defender PX301?
If you are experiencing a 'No Picture/Signal' issue with your Defender Security System, ensure all connections are secure and properly connected. Verify that your monitor is plugged into a power source using the 9VDC input on the back. Also, check for any obstructions blocking the camera's view and try re-pairing the camera and monitor.
Outlines Defender's one-year warranty, terms, and conditions for repair/replacement.
Introduces the PX301 wireless DVR security system and its capabilities.
Superior digital frequency for clear video/audio up to 100ft.
Records up to 350 mins of video/audio on 2GB SD card.
18 IR LEDs provide visibility up to 40ft in the dark.
Allows speaking with monitored individuals via built-in mic/speaker.
Durable aluminum housing for indoor/outdoor use.
Records on motion or by schedule for efficient monitoring.
System control via remote and connection to external TVs.
Lists the core system components and included accessories.
Options for expanding the system with extra cameras or accessories.
Identifies and describes the buttons on the front of the monitor.
Details the ports and slots on the monitor's rear and side.
Explains the functions available via the remote control.
Identifies camera parts and the button for pairing.
Guides camera placement and minimizing signal interference.
Instructions for wall or tabletop mounting and connecting power.
Steps for connecting the monitor to power.
How to use the joystick for menu and playback control.
Process for establishing a wireless connection between devices.
Inserting the SD card and understanding live view status icons.
Switching between single camera, quad, or automatic views.
Manual, motion-activated, and scheduled recording options.
Setting video quality to low (320x240) or high (640x480).
Configuring how long recording continues after motion detection.
Setting a daily schedule for automatic recording.
Managing the feature to record over old footage when the card is full.
Setting the system's date and time accurately.
Adjusting screen brightness and video output standards.
Configuring screen savers and adjusting alarm volume.
Adjusting zoom levels and restoring factory default settings.
How to view recorded footage directly on the monitor.
Transferring and viewing footage on a computer.
Using joystick for playback and deleting clips.
Solutions for missing video or audio signals.
Addressing issues with device pairing and night vision functionality.
Troubleshooting recording failures and remote control malfunctions.
Detailed technical specifications for the camera unit.
Detailed technical specifications for the monitor unit.
Identifies available replacement parts for the system.
Lists optional accessories to enhance system capabilities.
Provides a template for drilling mounting holes.
Information on where to find product details and support online.
Legal disclaimer regarding product use and liabilities.
General| Brand | Defender |
|---|---|
| Model | PX301 |
| Category | Security System |
| Language | English |
To Next Page
