4
Pre-Installation (continued)
PACKAGE CONTENTS
VOL
+
VOL
–
Light
Sync
Music
Part Description Quantity
A Doorbell 1
B Push button 1
Installation
1
Installing the doorbell batteries
□ Push the battery cover tab toward the battery
cover (1) and pull to remove.
□ Install 3 alkaline “C” batteries (not included)
into the doorbell (A). Ensure the batteries are
oriented correctly.
□ Replace the battery cover (1) on the back of the
doorbell(A).
NOTE: In typical use, alkaline batteries will last up to
one year.
VOL
+
VOL
–
LightSync
Music
2
Removing the battery tab
□ Remove the back of the push button (B) by
pushing in the tab on the bottom with a small
screwdriver (not included) and twisting it.
□ Remove the orange battery tab from the push
button (B).
ON
1 2
A
B
A
1
B