6
Operation
1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control.
Press and release the “VOL +” or “VOL –” button to
adjust the volume one step at a time.
VOL
+
VOL
–
Light Sync
Music
2
Muting the doorbell
The doorbell (A) can be muted for a select period of
time: full-time, 3 hours, 6 hours, 9 hours, or 12 hours.
The mute icon will turn green each time it is pressed
to show the amount of time selected.
□ Press and release the mute button on the front
of the doorbell (A) to select the amount of time
the doorbell (A) should be muted.
NOTE: The doorbell will flash the selected color each
time the push button is pressed whether the doorbell is
muted or unmuted.
OFF Full-Time 3Hr 6Hr 9Hr 12Hr
3
Selecting the doorbell light
color
The doorbell (A) will blink whenever the push
button(B) is pressed. There are 7 preset colors to
choose from.
□ Press and hold the “Light” button until the
doorbell (A) glows.
□ While the doorbell (A) is glowing, press and
release the “Light” button to select the desired
color.
□ Press the push button (B) to lock in the desired
color.
VOL
+
VOL
–
Light Sync
Music
4
Adding MP3 tunes to the
doorbell
The suggested tune length is 2-15 seconds. The
maximum tune length is 20 seconds. If the tune is
longer than 20 seconds, only the first 20 seconds will
play. 16MB available MP3 space in total.
□ Connect the USB cable (DD) to the doorbell (A)
and the computer.
□ Locate and open the external drive folder.
□ Drag the desired MP3 file to the doorbell (A)
drive.
□ Disconnect (eject per computer operating
system) the doorbell (A) from computer.
□ Remove the USB cable (DD).
IMPORTANT: The doorbell will not play when connected to the
computer.
VOL
+
VOL
–
Light
Sync
Music
A
A
A
A
DD
To Next Page
Loading...
