Defiant 5985 - Installation Steps (continued); Caulking Fixture Seal; Operation Overview; Adjusting Lamp Heads

7 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Installation (continued)
7
Caulking around the light
fixture
Ƒ Caulk around the 1-2- asy Connect™ (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING: Risk of re. Keep the lamp heads at least
2in. (51mm) from combustible materials.
CAUTION: Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
Ƒ Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
Ƒ If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
2
Rotating the sensor controls
downward
Ƒ Rotate the motion sensor (C) so the text faces
upward.
NOTICE: All clearances must be maintained. See Safety Information
on page 2.
NOTICE: The Deant mobile app must be downloaded to operate
the light xture. See Step 3 on page 8 for instructions.
270°
THIS SIDE UP
D
C
A