MAINTENANCE
Lift-off oven door
The oven door may be removed to improve oven access during cleaning.
Removing the inner door glass.
• The glass may be removed for cleaning purposes
by removing the two screws which hold it in
place.
• It is now possible to clean the inside of the outer
glass if required.
• Wash the glass in hot soapy water, rinse and dry.
• Re-assemble by carefully locating the rubber seal
in the embossed groove before fitting the glass.
The glass is marked “THIS SIDE TOWARDS OVEN”.
• Re-fit the two securing screws.
Removing the side racks and shelves
• The side racks and shelves may be removed
for cleaning purposes.
• Remove the bottom bake element guard.
• Slide the shelves and bake trays out fully
against the shelf stop.
• Lift the front slightly and slide them out.
• The side racks may be removed by pulling the
retainer rod slightly downwards thereby
dislodging it from the retainer lug at the
bottom centre. Lift the racks free of the
retaining slots in the oven wall.
• Replace in reverse order.
To Next Page
Loading...
