Page 10
Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to
save energy:
x Use dark coloured or enamel coated
cookware in the oven since the heat
transmission will be better.
x While cooking your dishes, perform a
preheating operation if it is advised in the
user manual or cooking instructions.
x Do not open the door of the oven
frequently during cooking.
x Try to cook more than one dish in the oven
at the same time whenever possible. You
can cook by placing two cooking vessels
onto the wire shelf.
x Cook more than one dish one after
another. The oven will already be hot.
x You can save energy by switching off your
oven a few minutes before the end of the
cooking time. Do not open the oven door.
x Defrost frozen dishes before cooking
them.
Initial use
Time setting
Before you can use the oven, the
time must be set. If the time is not
set, oven will not operate.
After setting the time, you can start and end
the cooking by selecting the desired position
with temperature button and function button.
If the current time is not set, time
setting will start increasing/moving
up from 12:00. Clock symbol '9'
will be displayed to indicate that
the current time has not been set.
This symbol will disappear once
the time is set.
1
Programme key
2
Cooking time
3
End of cooking time
4
Alarm symbol
5
Minus key
6
Plus key
7
Screen brightness setting
8
Alarm volume
9
Current time
10
Keylock
11
Adjustment key
While making any adjustment,
related symbols on the clock will
flash.
Press “–“ or “+“ (5/6) keys to set the time
after the oven is energized for the first time.
Current time settings are
cancelled in case of a power
failure. It needs to be readjusted.
To change the time of the day you have
previously set:
1. Press (11) key twice to activate current
time symbol '9'.
2. Press “–“ or “+“ (5/6) keys to set the
current time.
Changing screen brightness adjustment
1. Press (11) key to activate screen
brightness symbol '7' for screen
brightness adjustment.
2. Press '–' or '+' (5/6) keys to set the
desired brightness.
» Selected brightness level will appear as d-
01, d-02 or d-03 on the display.
To Next Page
Loading...
