Page 11
First cleaning of the appliance
Surfaces might get damaged by
some detergents or cleaning
materials. Do not use
aggressive detergents, cleaning
powders/creams or any sharp
objects during cleaning. Do not
use harsh abrasive cleaners or
sharp metal scrapers to clean
the oven door glass since they
can scratch the surface, which
may result in the glass
shattering.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a
cloth.
Initial heating
Heat up the appliance for about 30 minutes
and then switch it off. Thus, any production
residues or layers will be burnt off and
removed.
WARNING
Hot surfaces cause burns!
The appliance may be hot when
it is in use. Never touch the
inner sections of the oven,
heaters etc. Keep children
away. Always use heat
resistant oven gloves when
placing or removing dishes into/
from the hot oven.
Electric oven
1. Take all baking trays and the wire
shelves out of the oven.
2. Close the oven door.
3. Select Static position.
4. Select the highest bake power; (See
section on how to operate the electric
oven).
5. Operate the oven for about 30 minutes.
6. Turn off your oven.
Grill oven
1. Take all baking trays and the wire
shelves out of the oven.
2. The door must remain partially open.
3. Select the highest grill power; (See
section on how to operate the grill).
4. Operate the grill for about 30 minutes.
5. Turn off your grill.
Smoke and smell may emit for
a couple of hours during the
initial operation. This is quite
normal. Ensure that the room is
well ventilated to remove the
smoke and smell. Avoid directly
inhaling the smoke and the
smell that emits.
Final check
1. Connect the oven and switch on the
power.
2. Check the functions.
For appliances with a cooling fan
The built-in
cooling fan
cools both the
built-in cabinet
and the front of
the appliance.
Please note that the cooling fan
may continue to run well after the
oven has been switched off. The
duration is dependent on the
selected operating temperature.
This is a built-in safety feature to
ensure that your oven is cooled
down correctly. To reduce the
cooling fan running time, the oven
door may be left ajar after the
oven has been switched off.
Please be cautious of hot
surfaces.
1 Cooling fan
2 Control panel
3 Door
To Next Page
Loading...
