ALARM SET
ALARM ON/OFF
1. Select [Alarm] in Sys Set mode and press the < >
button, [New] appears on the display.
2. Press the < > button again to enter the new alarm
setting, [Normal alarm/ Power off/ Power on/ Exit] appears.
3. Rotate the Tuning knob to select [Normal Alarm] and press
the < > button. Now [Only Once/ Daily] shows on the
display.
4. Rotate the Tuning knob to select either [Only Once/Daily],
press the < > button to enter [Alarm Time Setting].
5. Rotate the Tuning knob to adjust hours, minutes and
seconds. Press the < > button to confirm. Now it shows
[Yes/No] and [Do you want to add?] on the display.
6. Rotate the Tuning knob to select [Yes], press the < >
button to confirm and enter the below setting sections:
- Sleep Time: 1~30 minutes SNOOZE timer
- Play Time: 1~30 minutes alarm time
- Alarm Count: 1~30 alarm count
- Alarm Music: Audio/Record alarm music selection
- Alarm Volume: 1~31 level
- Alarm Preview: Alarm with your preset music
- Exit: Exit the alarm setting
Press the < > button to turn off the alarm, and press any
other buttons to pause the alarm, and it will play again in few
minutes.
MENU
MENU
MENU
MENU
MENU
MENU
ALARM SET
ALARM ON
1. Select [Alarm On] under [New] in [Alarm set], follow
the steps of the normal alarm set. After confirming the
time, rotate the Tuning Knob to select [Yes], press the
< > to confirm and enter the following selections:
- Radio: Listens to the last radio station
(when auto turned on)
- Music Audio: Plays the last music file
(when auto turned on)
- Mic Record: Records via MIC(when auto turned on)
- Radio Record: Listens to and recording the last raido
station(when auto turned on)
Note: 1. [Normal Alarm], [Power on] timer, [Power off] timer
settings share the same steps.
2. You can Activate/Deactivate/Delete/Reset the alarm
by press the < > button after selecting the
particular alarm in [Alarm Set] mode.
- Alarm Symbol
-
- Alarm Deactivated
Alarm Activated
ALARM OFF
Note: If the setting time of [Sleep Timer] is earlier than that of
the [Alarm off], the [Sleep Timer] has the priority.
Select [Alarm Set] in Sys Set mode and press the Tuning
Knob to enter. [New] appears on the display. Press the
Tuning Knob again , [Normal Alarm, Power off, Power on,
Exit] appears. Rotate the Tuning Knob to select
[Power off], then following the same steps in [Alarm Set].
MENU
MENU
NOTE: You can totally 6 alarms. set
23
24