Deger DEGERtracker D60H - Fault Message

24.03.2017 ASSEMBLY AND OPERATING MANUAL DEGERtracker D60H, D80, D100 Page 39
13.5 Fault message
DEGERtracker D60H
DEGERtracker D80
DEGERtracker D100
Delivery date
Serial-No. of DEGERtracker
204-
Serial-No. EC-6
Serial-No. EMO
Individual system
Park with …… systems
Wind monitor type
CCB BASIC CCB STANDARD CCB ADVANCED
(made of plastic) (made of aluminum, non-heated) (made of aluminum, heated)
.
free standing building integrated
Measuring values as per
troubleshooting plan
Yes
no
East-West axis rotates to the brightest spot (possibly cover a sensor cell)
East-West drive can be moved with joystick (CCB) to both directions
Elevation axis rotates to the brightest spot (possibly cover a sensor cell)
Elevation drive can be moved with joystick (CCB) to both directions
Control via wind monitor: moves to horizontal position
Measuring values on energy converter
Voltage input
Terminal L-N
V
LED MOTOR POWER OK
LED green
LED off
LED SENSOR POWER OK
LED green
LED off
LED EL MOTOR
Terminal 1-2
LED green
LED red
LED AZ MOTOR
Terminal 3-4
LED green
LED red
LED EL SENS OUT
Terminal 11-12
LED green
LED red
LED AZ SENS OUT
Terminal 13-14
LED green
LED red
Signal on SAVE POS.?
Terminal 20-21
+ or -
V
Signal on external EL?
Terminal 16-17
+ or -
V
Signal on external AZ?
Terminal 18-19
+ or -
V
Current consumption elevation motor
+ or -
A
Current consumption azimuth motor (East-West)
A
Jumper settings
J1 J2 J3 J4 J5 J6 J7
Contact
Installer Operator
Company / Name
Address
Post code/Place
Contact > Phone number, e-mail address
Delivery Address
for returning parts:
DEGERenergie GmbH & Co. KG
Service
Industriestr. 70
D-72160 Horb a.N.
Germany
Problem description
Spare parts requirement: