Deif AGC 200 - Getting Started with the DEIF Utility Software (USW); Downloading the Software; Installation of USB Drivers; Getting Connected

3.2 Getting started with the DEIF utility software (USW)
3.2.1 Downloading the software
1. Go to www.deif.com
2. Select Documentation & Software
3. Select Software download
4. In the dropdown menu, select Multi-line 2 utility software v.3.x
5. Fill in your e-mail address and click “Submit”
You will now receive an e-mail containing a link. Click the link and follow the instructions.
The USW is now installed on your computer.
3.2.2 Installation of USB drivers
On Windows Vista machines, the USB drivers are installed automatically.
This is the procedure on Windows XP machines:
When you connect the DEIF product, Windows XP will launch two "Hardware Wizards". Two drivers are in-
stalled, so please let Windows execute both "Found new Hardware Wizard"s.
We recommend letting the Hardware Wizard install the software automatically by choosing the "Recommen-
ded" option. If the "Advanced" option is chosen, the needed files are available from the USW3 installation
folder (default: C:\Program Files\DEIF\USW3\) in the "USB driver files/source PreInstaller" folder.
Please select "Continue Anyway" if a "Hardware Installation" warning (see screenshot below) appears during
the installation.
3.2.3 Getting connected
Connect the service port to the USB on the computer (option J7 or option J3).
AGC 200 quick start guide 4189340608 UK
Getting started
DEIF A/S Page 13 of 21