Deif AGC 200 - Read Parameters from the Device; Basic Configuration of a Device Using the Utility Software

Click the "Connect" icon.
You are now online with the unit.
3.2.4 Read parameters from the device
Open the "Parameters" list.
Click the "Read parameters
from the device" icon.
After retrieving all the parameters, the device is ready to be configured.
3.2.5 Basic configuration of a device using the utility software
When the parameters have been uploaded, the options below will be available.
Click the "Gen"
tab.
AGC 200 quick start guide 4189340608 UK Getting started
DEIF A/S Page 15 of 21