Deif AMC 600 - IP Address Viewing and Reset

5.3 View existing IP address
To view current IP address type:
~ # ifconfig
The AMC 600 can now be accessed via Ethernet on the above IP address.
To reset the IP address to factory default use the command (see section "Reset IP to factory default):
~ # difconfig reset
Alternatively:
~ # factory-reset -n
The AMC 600 then has a new IP-configuration. Reboot the AMC 600 for the changes to take effect. To reboot the AMC 600, type:
~ # reboot
Wait 10 seconds and the AMC 600 is ready for connections at the default IP-address 192.168.20.13 and can be accessed via the
Ethernet port.
User's manual 4189341335A EN Page 26 of 33