Deif CGC 400 - Push-buttons and LEDs; Push-button Functions

2. Mounting
2.1 CGC 400 mounting
2.1.1 Mounting of the unit
The unit is designed for mounting by means of six fixing clamps, which are included at delivery.
2.1.2 Unit dimensions and panel cutout
The unit is designed for mounting in the panel front.
In order to ensure optimum mounting, the panel door must be cut out according to the following measure-
ments:
H × W (mm) = 160.0 × 220.0 (+0.4/-0.0)
H × W (inches) = 6.30" × 8.66" (+0.01575/-0.0)
174.1 (6.85)
234.1 (9.22)
158.5 (6.24)
218.5 (8.60)
38.1 (1.50)
45.6 (1.80)
0.3 Nm
CGC 400 installation instructions
4189340785 UK
Mounting
DEIF A/S Page 5 of 25