Deif PPU 300 User Manual

OPERATOR'S MANUAL
Paralleling and Protection Unit
PPU 300
DEIF A/S · Frisenborgvej 33 · DK-7800 Skive
Tel.: +45 9614 9614 · Fax: +45 9614 9615
info@deif.com · www.deif.com Document no.: 4189341099G

Deif PPU 300 Specifications

General

Protection Class	IP20
Display	LCD
Resolution	128 x 64 pixels
Inputs	8 digital, 4 analog
Output Voltage	24 V DC
Certifications	CE, UL
Supply Voltage	24 V DC
Communication	RS485, Ethernet
Input Voltage Range	0-10 V DC
Output Current	0.5 A
Protection	Short-circuit
Humidity	95% non-condensing
Dimensions	144 x 144 mm
Storage Temperature	-40°C to 85°C

Summary

1. Introduction to the Operator's Manual

About the Operator's Manual

Information about the operator's manual and its purpose.

Warnings and Safety Guidelines

Safety guidelines and warnings for installation and operation.

Legal Information

Copyright, disclaimer, and third-party information.

2. Overview of the Controller

Controller Overview

General overview of the PPU 300 controller and its operation.

Operator Messages Explained

Explains controller status texts and operator information messages.

3. Controller Equipment Details

Display Unit Overview

Details about the display unit's layout and components.

Display Unit DU 300 Layout

Description of the physical layout of the DU 300 display unit.

Display Unit DU 300 Options

Information on options for the DU 300 display unit's bottom strip.

4. Operating the Controller

Operator Actions Introduction

Introduction to basic operator actions on the controller.

Basic Operator Actions

Covers fundamental operations like changing modes and starting/stopping.

5. Using the Display Unit

Display Unit Introduction

Overview of accessing controller information via the display unit.

About the Display Unit

Explains the display unit's functions and components.

Status Bar Information

Details the information presented in the display unit's status bar.

6. Log On and Permissions

User and Group Permissions

Information about user and group permissions for controller access.

Logging On to the Controller

Steps and procedures for logging onto the controller.

7. Configuration Settings

Date and Time Configuration

How to view and configure the controller's date and time settings.

Custom Live Data View Design

Configuring custom Live data views on the display unit.

Controller Pairing

Process of pairing the display unit with a controller.

8. Alarms Management

Alarm Indication and List

Explains alarm indication and the alarm list.

Operator Actions for Alarms

Actions operators can take regarding alarms like acknowledging or silencing.

9. Live Data Display

Live Data Introduction

Overview of live data display and its purpose.

Viewing Live Data

How to view and interpret live operational data.

10. Tools and Utilities

Restoring Controller Backups

Procedures for restoring controller backups.

Creating Controller Backups

Creating and managing controller backup files.

11. System Log

Log Introduction

About the system log and recorded events.

Reviewing Log Events

How to review logged events and their details.

12. System Information

Info Menu Introduction

Overview of the info menu for system details.

About Controller and Display Unit

Viewing controller and display unit information.

13. Troubleshooting Guide

Troubleshooting Introduction

Finding the source of system problems.

Troubleshooting with SWBD Control

Using switchboard control for troubleshooting procedures.

14. Maintenance Procedures

PCM3.1 Internal Battery Replacement

Steps for changing the internal battery of the PCM3.1 module.

15. End-of-Life Disposal

Disposal of Waste Electrical and Electronic Equipment (WEEE)

Guidelines for proper disposal of waste electrical and electronic equipment.

16. Glossary and Symbols

Glossary of Symbols

Explains symbols used for notes and warnings in the manual.

Display Unit Symbols and Push-buttons

Visual references for display unit symbols and push-buttons.