Deif PPU 300 - Regulator Status; About Regulator Status; View Regulator Status Screens

a. Highlight Backup location using Up or Down .
b. Press OK to open the list of backup locations.
INFO
You can only store 20 backups on the controller. When you have 20 backups stored on the controller, you have to
delete a backup on the controller before you can save a new backup to the controller.
c. Highlight the location where you want to store the backup using Up or Down , and press OK to confirm your
selection.
5. Select Create backup
Create backup
to create a backup.
INFO
If you are not already logged on, you are prompted to do so.
• You are prompted to confirm that you want to create a backup file:
•
• Press OK to create the backup.
• Press Back
to cancel creating the backup.
10.3 Regulator status
10.3.1 About Regulator status
The Regulator status page allows you to see the regulator status for governor and AVR:
• GOV/AVR selected regulaton mode
• GOV/AVR active regulation mode
• GOV/AVR setpoint
• GOV/AVR actual value
• GOV/AVR actual output
10.3.2 View Regulator status screens
View the
Regulator status under Tools > Regulator status.
OPERATOR'S MANUAL 4189341099G UK Page 108 of 130