Deif PPU 300 - Creating Controller Backups

1. Select Tools from the Home menu.
2. Select Restore from the Tools menu.
3. Highlight the backup that you want to delete using Up or Down .
4. Press Delete
Delete
to delete the backup.
INFO
If you are not already logged on, you are prompted to do so.
• You are prompted to confirm that you want to delete the selected backup file:
•
• Press OK to confirm deleting the selected backup file.
CAUTION
The backup file will be permanently deleted and cannot be recovered.
• Press Back to cancel deleting the backup file.
10.2 Backup
10.2.1 About Backup
The backup page allows you to create and store backup files on the controller, or the controller's SD card (FAT32).
INFO
You can store up to 20 backups on the controller.
10.2.2 Create backups
Create controller backups under
Tools > Backups.
Creating backups
To create a controller backup file, perform the following steps:
1. Select Tools from the Home menu.
2. Select Backup from the Tools menu.
3. Optional: Enter a unique name for the backup.
a. Highlight Backup name using Up
or Down .
b. Press OK to open the virtual keyboard.
c. Use the virtual keyboard to type in a new backup name.
d. Select Done
Done
to use the new backup name.
4. Optional: Change the backup location.
OPERATOR'S MANUAL 4189341099G UK Page 107 of 130