Figure 10.7 Example groups screen
More information
See Other functions in the Designer's handbook for more information regarding permissions.
Reviewing group information
To view the group information, perform the following steps:
1. Select Tools, from the Home menu.
2. Select Advanced, from the Tools menu.
3. Select Permissions, from the Advanced menu.
4. Select Groups, from the Permissions menu, to view the group information.
• Details of the groups setup on the controller are displayed on screen.
• The group for the currently logged on user is shown with a green dot
.
5. Scroll through the information by pressing Up or Down .
6. Further information is displayed by pressing OK
on a highlighted group.
• This includes all the associated users for the selected group.
10.8.3 View users
View the
User information under Tools > Advanced > Permissions > Users.
OPERATOR'S MANUAL 4189341099G UK Page 117 of 130
To Next Page
Loading...
