Deif RT-2 User Manual

DEIF A/S Tel.: (+45) 9614 9614
Frisenborgvej 33, DK-7800 Skive Fax: (+45) 9614 9615
Denmark E-mail: deif@deif.com
DEIF A/S
Installation instructions
Angle position transmitter
Type RT-2
Marine bridge instrumentation
4189350013C (UK)
• Analogue output
for direct connection of one or more indicators
• Measuring output:
DC current signal 0..20mA or 4..20mA
• Potentiometer for adjusting span and zero
• Angle position 0..90 ° or 0..140 °
• Continuous shaft rotation
NO LONGER FOR SALE

Deif RT-2 Specifications

General

Brand	Deif
Model	RT-2
Category	Transmitter
Language	English

Summary

Technical Data

Measuring Output

Accuracy Specifications

DC Power Supply Range

Operating voltage range: 12-33V DC with polarity reversal protection.

Permissible Vibration Levels

Operating Environmental Conditions

Housing Protection Rating

Mounting Instructions

Transmitter Mounting Options

Drilling and Cut-out Diagrams

Alignment and Zero Adjustment

Aligning the transmitter for correct electrical zero setting.

Electrical Connections

Connecting Transmitter

Screw Terminals and Cable Glands

Description of terminals and glands for wiring.

Wiring Procedure

Step-by-step guide for connecting wires to terminals.

Measuring Range Adjustment

Coarse Zero Adjustment

Aligning the measured device zero with the transmitter's external zero.

Fine Zero and Span Adjustment

Using potentiometers to set the zero and span output currents.