EasyManua.ls Logo

Delft Imaging Delft Light - Annex C Mobisun Solarpanel; KEY Features; Operation

Delft Imaging Delft Light
11 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
ANNEX C MOBISUN SOLARPANEL
The Delft Light (backpack X-ray) has an option to use it with the Mobisun solarpanel,
Li-ION battery and inverter. This system is to power all required components with a
portable(6kg) solar/powerpack!
The internal battery capacity is enough to recharge the X-ray and detector batteries
and power the CANON laptop and CAD4TB tablet.
The 25 Watt integrated solar panel takes 16 hours to fully charge the Mobisun internal
battery again. It is also possible to use the GRID to recharge the internal battery,
which takes approx. 2,5 hours.
KEY features:
Output 230 VAC @ 250 Watt
Output 2 x USB, 5 Volt, 3,2 Amp
Peak power 500 Watt,
Battery capacity 70 Ah, 256 Wh
Water resistant IPX4
Possible to add more portable solarpanels to reduce recharging time
Dimensions 550x300x50 mm
Weight 6 kg
Operation
Install the Mobisun in a location where it can capture most of the (sun) light. Attach
the delivered power cable to the 230 VAC power outlet on the side. Select 230 VAC
AC operation by flipping the switch to 230 VAC. Now the internal battery is able to
power the two battery chargers (one for the detector, one for the X-ray) and the
laptop