Dell EMC PowerEdge R6515 - Left Control Panel View

Left control panel view
Figure 4. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 5. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 4. Left control panel
Item Indicator, button, or
connector
Icon Description
1 Status LED indicators N/A
Indicates the status of the system. For more information, see the Status LED
indicators section.
2 System health and system ID
indicator
Indicates the system health. For more information, see the System health and
system ID indicator codes section.
3 iDRAC Quick Sync 2 wireless
indicator (optional)
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The Quick Sync 2
feature allows management of the system using mobile devices. This feature
aggregates hardware/firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system. You can access
system inventory, Dell Lifecycle Controller logs or system logs, system health
status, and also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and virtual Kernel
based Virtual Machine (KVM), on a supported mobile device. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/
poweredgemanuals
NOTE: For more information about the indicator codes, see the System diagnostics and indicator codes section.
PowerEdge R6515 system overview 11