Dell EMC PowerEdge R6515 - Removing the expansion card risers

Card type Slot priority Maximum number of cards
Mellanox 10G, CXP DP SFP 2 1
Mellanox 25G, CX4LX DP SFP 2 1
Qlogic 10G BASET DP 2 1
Qlogic 10G SFP+ DP 2 1
Qlogic 25G SFP DP 2 1
Qlogic (FC8 DCL) 2 1
Qlogic (FC16 SP/DP) 2 1
Qlogic (FC32 DP) 2 1
LOM Riser ( 2x1G)/(2x10G)/(2x25G) 1 1
Table 46. Riser configuration (include slots 1,2, and 3)
Card type Slot priority Maximum number of cards
PERC9 (H330, HBA 330, H730P) Internal Slot
1
PERC10 (H740P) Internal Slot
1
NVME PCIE SSD 2,3 2
Broadcom (1G DP/1G QP) 2,3 2
Broadcom (10G DP) 2,3 2
Broadcom (25G DP) 2,3 2
Intel 10G (BaseT DP/QP) 2,3 2
Intel 10G (SFP+ DP/QP) 2,3 2
Intel 1G (DP/QP) 2,3 2
Emulex (FC32 2P) 2,3 2
Emulex (FC16 1P)/(FC16 2P) 2,3 2
Emulex (FC8 SC)/(FC8 DLC) 2,3 1
Mellanox 10G, CXP DP SFP 2,3 2
Mellanox 25G, CX4LX DP SFP 2,3 2
Qlogic 10G BASET DP 2,3 2
Qlogic 10G SFP+ DP 2,3 2
Qlogic 25G SFP DP 2,3 2
Qlogic (FC8 DCL) 2,3 2
Qlogic (FC16 SP/DP) 2,3 2
Qlogic (FC32) 2,3 2
LOM Riser ( 2x1G)/(2x10G)/(2x25G) 1 1
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
72
Installing and removing system components