Right control panel view
Figure 6. Right control panel
Table 5. Right control panel
Item Indicator or button Icon Description
1 Power button
Indicates if the system is powered on or off. Press the power button to
manually power on or off the system.
NOTE: Press the power button to gracefully shut down an ACPI-
compliant operating system.
2 USB 2.0-compliant port
The USB port is a 4-pin connector and 2.0-compliant. This port enables you to
connect USB devices to the system.
3 iDRAC Direct LED indicator N/A The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port
is actively connected to a device.
4 iDRAC Direct port (Micro-
AB USB)
The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC direct
Micro-AB USB features. For more information, see the www.dell.com/
idracmanuals.
NOTE: You can configure iDRAC Direct by using a USB to micro USB
(type AB) cable, which you can connect to your laptop or tablet.
Cable length should not exceed 3 feet (0.91 meters). Performance
could be affected by cable quality.
NOTE: For more information on the ports, see the Ports and connectors specifications section.
Rear view of the system
Figure 7. Rear view of the system
12
PowerEdge R6515 system overview