Name: Dell EMC Unity 480
Brand: Dell EMC
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Dell EMC  Quick Start

Page 3 of 8

3. Install the system onto the rails

The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal

injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a

mechanical lift and/or help from another person.

1. From the front of the rack, slide the enclosure onto the rails.

Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not easily

slide out.

2. (Optional) If securing the system for shipment in the cabinet or for other unstable environments,

a. Locate the captive screw under each latch and tighten to the front of the cabinet using a #1 Phillips

screwdriver.

Other manuals for Dell EMC Unity 480

Questions and Answers:

Need help?

Do you have a question about the Dell EMC Unity 480 and is the answer not in the manual?

General