Dell 100 Series - Correct Location for Ball Bearing Retainer Assembly; Inner Rail over the First Part of Ball Bearing Retainer Assembly

Figure 12 Correct location for ball bearing retainer assembly
8. From the front of the cabinet, align the inner rails attached to the server with
the plastic guide block on the front inside of each slide rail.
Figure 13
Inner rail over the first part of ball bearing retainer assembly
9. Slide the server into the cabinet so the inner rails extend over the plastic guide
blocks and the first part of the ball bearing retainer assemblies.
2U4N Configuration Equipment Installation
Install the 2U4N server in the cabinet 37