* Factory default setting
Off*
On
To exit Hex Trace, turn off the printer.
Print Quality
Test Pages
Help isolate print quality problems, such as streaking. Three pages print to help you evaluate print
quality: a text page with printer information, cartridge information, current margin settings and a
graphic; and two pages with graphics.
Press and hold the Continue button
.
Reset
Photoconductor
Counter
Return the photoconductor counter to zero.
NOTE: The replace photoconductor message should be cleared only when the imaging drum has been
replaced.
Reduced Curl Reduce the throughput in order to reduce page curl.
Off*
On
To Next Page
Loading...
