Dell 210-BDFZ - Page 50

50 │ Operating your monitor
Icon Menu and
submenus
Description
Input Source Use the Input Source menu to select between the different
video signals that may be connected to your monitor.
Brightness/Contrast USB-C 90W
Input Source DP
27 Monitor
Color HDMI
Display Auto Select On
Menu Auto Select for USB-C Prompt for Multiple Inputs
Personalize Rename Inputs
Others Reset Input Source
Exit
USB-C 90W
*USB-C
®
90 W
Select the USB-C input when you are using the USB-C
connector. Press the button to confirm the selection.
DP Select the DP input when you are using the DisplayPort (DP)
connector. Press the button to confirm the selection.
HDMI Select the HDMI input when you are using the HDMI
connector. Press the button to confirm the selection.
Auto Select Turning on the function allows you to scan for available input
sources.
Auto Select
for USB-C
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays the “Switch to
USB-C Video Input” message for you to choose whether to
switch or not.
Yes: switch to USB-C Video input No: Stay on the current
input.
• Yes: Always switches to USB-C video input (without asking)
when the USB Type-C cable is connected.
• No: Never automatically switches to USB-C video input
when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: The option is available only when Auto Select is on.