Dell 2350 - Back Panel

Back Panel
Back Panel
Connector Description
Lock This accepts locking devices for protecting the Wireless 2350 from
theft.
Reset Use an object, such as a paper clip, to press the button for at least 5
seconds. The Power LED will be off for a short time and then light up
again. You can then release the button to reset the device to its
factory-default settings.
Internet This accepts an RJ-45 connector for network cabling.
LAN 1
LAN 2
LAN 3
LAN 4
This accepts RJ-45 connectors for connecting up to 4 computers to the
Wireless 2350's 4-port switch.
Power Connect the power adapter to this Power port, and then plug the other
end of the power cable into a power outlet.