your firmware upgrades.
Reset Device
Use the Reset Device function if a system failure occurs. This feature does not reload the
factory default settings. It simply resets the device to the network settings that existed on the
device before the system failure occurred. This is equivalent to unplugging the device and
plugging it back in or pressing the reset button for less than 3 seconds until the Power light
starts to blink. No settings are lost.
NOTICE:
If you were in the process of updating the network settings, those changes are
lost when the device is reset.
Click the Start button to reset the Wireless 2350 to its current firmware settings. While the
Wireless 2350 is reset, the Power light on the front of the router blinks.
Advanced Settings:
Advanced IP Settings
DHCP Server Settings
Time Zone
Advanced Wireless
Parental Control
Access Control Settings
Port Forwarding Settings
Static Routing
Administration Settings
To Next Page
Loading...
