Administrative Support
Using the Embedded Web Server
Locking the Operator Panel Menus Using the Embedded Web Server
Creating an Administrative Password
Using the Embedded Web Server
If the printer is installed on a network, the Embedded Web Server is available for a range of functions:
Configuring printer settings
Checking the status of the printer supplies
Configuring network settings
Creating a password for certain menus
Viewing reports
Restoring the factory default settings
Viewing the virtual display
To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.
NOTE: If you do not know the IP address of the printer, print a network setup page and locate the IP
address in the TCP/IP section. For more information, see Printing a Network Setup Page.
To Next Page
Loading...
