print correctly.
To cancel the print job, press the Cancel button .
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and
then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
For more information on how to enable Resource Save, see Setup Mode.
To prevent this error in the future, install additional memory.
37 Insufficient Memory to Collate Job
The printer memory does not have enough free space to collate the job.
Press the Back button to print the portion of the job already stored and begin collating the rest of
the print job. The current job may not print correctly.
To cancel the current print job, press the Cancel button .
To prevent this error in the future:
Install additional memory.
Simplify the job. Reduce the complexity of the page by reducing the amount of text or graphics on the
page and deleting unnecessary fonts or macros.
37 Insufficient Defrag Memory
To clear the message, press the Back button . The current job may not print correctly.
To cancel the print job, press the Cancel button .
To prevent this error in the future install additional memory.
To Next Page
Loading...
