Dell 4100 - Security Menu Categories and Password Features

Using the System Setup Program 4-9
PS/2 Mouse
Setting PS/2 MOUSE to ENABLED (the default) allows an
installed PS/2 mouse to function. Disabling PS/2 MOUSE
frees interrupt request (IRQ) 12, but also prevents any
installed PS/2 mouse from functioning.
Security Menu Categories
To access the Security menu (see Figure 4-4), use the
arrow keys to highlight Security. This section
explains in detail the System Setup categories in the
Security menu.
Figure 4-4. Security Menu of the System Setup Program
Supervisor Password Is
This category displays whether the supervisor password
is disabled or enabled. When ENABLED is displayed, the
supervisor password has already been set and is required
in order to have full access (see Table 4-2) to the System
Setup program. The default is DISABLED.
User Password Is
This category displays whether the user password is dis-
abled or enabled. When ENABLED is displayed, the user
password has already been set and is required at boot up.
Unlike the supervisor password, the user password does
not allow you full access (see Table 4-2) to the System
Setup program. The default is DISABLED.
configuration options and system data title box help
key functions
<ENTER>