5-8 Dell PowerEdge 4100/180 and 4100/200 Systems User’s Guide
CPU Options
• CACHE (same as LEVEL 2 CACHE in the System Setup
program)
• CPU SPEED
Boot Options
• POST ERRORS
• NUM LOCK
• RESET BUTTON
• SPEAKER ENABLE
• BOOT SEQUENCE
• PCI BUS SCSI A
• PCI BUS SCSI B
• PCI SCAN SEQUENCE
Password Options
• PASSWORD ON BOOT
• SUPERVISOR PASSWORD
• USER PASSWORD
Mouse Options
• INTEGRATED MOUSE
Video Options
• FAST VIDEO BIOS
Diskette Options
• INTEGRATED DISKETTE CONTROLLER
• DRIVE A
• DRIVE B
• DRIVE ACCESS
The DRIVE A and DRIVE B categories work the same as
DISKETTE DRIVE A and DISKETTE DRIVE B in the System
Setup program. The DRIVE ACCESS category allows
access to the diskette drive to be controlled by the super-
visor or user password to prevent unauthorized access.
Integrated Serial Interface
• SERIAL PORT 1
• SERIAL PORT 2
Integrated Parallel Interface
• PARALLEL PORT
• PARALLEL PORT MODE (same as PARALLEL MODE in
the System Setup program)
Embedded PCI SCSI Controller
• PCI FUNCTION 1
Embedded PCI VGA Controller
• PCI FUNCTION 1
• STANDARD VGA RESOURCES
NOTE: You can clear the system configuration parame-
ters from NVRAM by having a trained service technician
place a jumper on the EISA jumper pins and then boot
the system with the jumper in place. See Table C-1 in
Appendix C of the Installation and Troubleshooting
Guide for more information.