Recover or rebuild a degraded virtual drive
You can manually rebuild a degraded virtual disk. RAID rebuild is available only when a degraded RAID volume is present and
there is an available target device. If a foreign virtual disk is in rebuild state, rebuild starts automatically after you import the
virtual disk and reboot the server.
View RAID controller information
About this task
The Controller information menu allows you to view the properties of the RAID Controller.
Steps
1. Enter the UEFI Configuration Utility. See Enter the UEFI Configuration Utility.
2. Click Controller information.
The RAID controller information is displayed.
28 BOSS-N1 Configuration Utility
To Next Page
Loading...
