Table 2. Supported M.2 drives of BOSS-N1 Monolithic controller
Drive Model Capacity
SK Hynix PE8010 480 GB, 960 GB
Micron 7400 480 GB, 960 GB
NOTE: Dell Technologies recommends that you use the BOSS-N1 Monolithic controller only as an operating system boot
device.
NOTE: Ensure that M.2 drives have the latest firmware. You can download the latest firmware from www.dell.com/
support/home.
Operating systems supported by BOSS-N1 controllers
See Dell Technologies Enterprise operating systems support for a list of supported operating systems by a specific server for
the BOSS-N1 controllers.
NOTE: For the latest list of supported operating systems and driver installation instructions, see the operating system
documentation at www.dell.com/operatingsystemmanuals. For specific operating system service pack requirements, see the
Drivers and Downloads section at www.dell.com/manuals.
8 Dell Boot Optimized Storage Solution-N1