4. Install:
a. optical drive
b. 3.5-inch hard drive chassis
c. cooling shroud
d. front bezel
e. cover
5. Follow the procedure in After Working Inside Your Computer.
Memory modules
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the: cover.
a. cover
b. front bezel
c. 3.5-inch hard drive chassis
d. drive cage
e. Cooling shroud
3. To remove the front memory module:
a. Pull the clips securing the memory module until the memory module pops up [1].
b. Remove the memory module from the system board [2].
40
Disassembly and reassembly