Dell D13S - System Configuration Screen Options

Option Description
Boot Sequence
Boot Sequence Allows you to change the order in which the computer attempts to find an
operating system. The options are:
● Windows Boot Manager
● Onboard NIC(IPV4)
● Oboard NIC(IPV6)
● PEBOOT
By default, all the options are checked. You can also deselect any option or change
the boot order.
Boot List Options Allows you to change the boot list option:
● Legacy External Devices
● UEFI (default)
Advanced Boot
Options
This option allows you the legacy option ROMs to load.
● By default, the Enable Legacy Option ROMs is disabledenabled
● This option allows you the legacy option ROMs to load. By default, the Enable Attemot Legacy Boot
is disabled.
.
UEFI Boot Path
Security
This options control whether or not the system will prompt the user to enter the Admin password (if set)
when booting a UEFI boot path from the F12 Boot Menu
● Always Except Internal HDD (default)
● Always
● Never
Date/Time Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
● Disabled
● Enabled
● Enabled w/PXE: This option is enabled by default.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI (default)AHCI
● RAID On(default)
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA-0
● SATA-1
● SATA-2
● SATA-3
● M.2 PCIe SSD-0
SMART
Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
● Enable SMART Reporting
USB
Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
80 System Setup overview