Dell D3218HN - Setting Up the Monitor; Attaching the Stand; Removing the Stand

Setting up the monitor 9
Setting up the monitor
Attaching the stand
2
1
3
1. Place the monitor face down on a flat and clean surface.
2. Align the screw holes on the monitor with the screw holes on the stand.
3. Replace the four screws that secure the monitor to the base. Tighten the
screws firmly.
Removing the stand
3
2
1
1. Place the monitor face down on a flat and clean surface.
2. Remove the four screws that secure the monitor to the stand.
3. Remove the stand.