Setting Up and Using Your Computer 13
4
Turn on the printer and then turn on the computer. If the
Add New Hardware Wizard
window appears, click
Cancel
.
5
Install the printer driver if necessary. See the documentation that came with your printer.
Connecting Two Monitors
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI
adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector.
If you are connecting a television, you may connect only one monitor (VGA or DVI) in addition to the
television.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect
and enable your monitors. The instructions tell you how to connect either two monitors (each with
a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or a
television.
Connecting Two Monitors With VGA Connectors
1
Follow the procedures in "Before You Begin" on page 47.
NOTE: If your computer has integrated video, do not connect either monitor to the integrated video
connector. If the integrated video connector is covered by a cap, do not remove the cap to connect the
monitor. The monitor will not function.
parallel printer cable
parallel connector on computer
connector on printer
screws (2)
clips (2)
notches (2)
To Next Page
Loading...
