Removing and Installing Parts 69
9
If you removed a sound card:
a
Enter system setup (see page 96), select
Audio Controller
, and then change the setting to
On
.
b
Connect external audio devices to the audio connectors on the computer back panel.
10
If you removed an add-in network connector:
a
Enter system setup (see page 96), select
Network Controller
, and then change the setting
to
On
.
b
Connect the network cable to the integrated connector on the computer back panel.
11
Install any drivers required for the card as described in the card documentation.
Front Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
To Next Page
Loading...
