Dell E1911 - Setting up the Monitor; Attaching the Stand; Connecting Your Monitor

Great user manuals database on UserManuals.info
Back to Contents Page

Setting Up the Monitor
Dell™E1911 monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base 
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount

Attaching the Stand


Connecting Your Monitor
To connect your monitor to the computer:
1. Turnoffyourcomputeranddisconnectthepowercable.
Connect the blue (VGA) cable from your monitor to your computer.
NOTE: The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base:

1.
Place the monitor stand base on a stable table top.
2.
Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.