Setting Up the Monitor | 15
Setting Up the Monitor
Attaching the Stand
NOTE: The stand riser and stand base are detached when the monitor is shipped
from the factory.
NOTE: The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
CAUTION: Do not remove the monitor from the packaging box before attaching
the stand.
Attach the stand assembly to the monitor.
1 Follow the instructions on the flaps of carton to remove the stand from the top
cushion that secures it.
2 Connect the stand riser to stand base.
3 Lift the cover, as shown.
To Next Page
Loading...
