Figure 60. Removing an OCP card
3. Press the OCP card retention latch to lock it.
Next steps
1. Install the OCP filler.
2. Install the expansion riser 2.
3. Install the expansion card riser 1.
Installing the OCP card filler
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the expansion card riser 1.
4. Remove the expansion card riser 2.
Steps
Align and insert the OCP filler until it is firmly seated.
Installing and removing system components
63
To Next Page
Loading...
