3. You can also view the script for the Hardware ISO, which is useful in helping to
identify and troubleshoot log entries:
less /opt/dell/toolkit/systems/drm_files/apply_bundles.sh
Results
The script attempts to configure several boot order commands, regardless of the
hardware configuration of the VxFlex Ready Node server. This allows the script to
support multiple hardware platform configurations.
Therefore, it is normal to see these error messages within the logs:
Firmware updates may also display and log the following message:
This update is not compatible with your system configuration.
These firmware are included on the ISO in order to support various VxFlex Ready
Node platforms. The log messages do not necessarily indicate a failure.
Additional resources
This section contains information regarding additional resources that may be helpful
useful when using the Hardware ISO.
VxFlex OS resources
VxFlex Ready Node deployments have specific guidelines regarding server installation,
rack and stack procedures, and power and networking requirements.
The
VxFlex Ready Node Hardware Installation Guide
describes how to install the physical
components of a VxFlex Ready Node system. For additional information regarding the
VxFlex Ready Node product, documentation, advisories, downloads, and white papers,
visit https://support.emc.com/products/42216.
Reference Material
Additional resources 77
To Next Page
Loading...
