Dell EMC VxFlex Ready Node - Vxflex os Component Requirements; Vxflex os Cluster Components; Vxflex os Gateway Server Requirements-Vxflex Ready Node

VxFlex OS component requirements
Components and servers in the VxFlex OS system must meet the following requirements:
VxFlex OS cluster components
The following is the list of required VxFlex OS servers:
VxFlex OS component servers
l
3-node cluster
n
One Master MDM
n
One Slave MDM
n
One Tie Breaker
n
Minimum of three SDSs (on the same servers as the above components, or on three different servers)
n
SDCs, up to the maximum allowed (on the same servers as the above components, or on different servers)
l
5-node cluster
n
One Master MDM
n
Two Slave MDMs
n
Two Tie Breakers
n
Minimum of three SDSs (on the same servers as the above components, or on three different servers)
n
SDCs, up to the maximum allowed (on the same servers as the above components, or on different servers)
VxFlex OS Gateway
Install the VxFlex OS Gateway server on a separate server, or together with an MDM or SDS. Do not install the VxFlex
OS Gateway on an SDC server or on an SDS on which RFcache will be enabled.
VxFlex OS Gateway server requirements—VxFlex Ready Node
The following is a list of server requirements for the VxFlex Ready Node VxFlex OS Gateway:
Supported operating systems - VxFlex Ready Node R640 and R740xd
l
Windows 2016 or 2019, including the Visual C++ redistributable 2010 package, 64-bit. Server Core editions are
not supported.
l
Linux:
n
CentOS 7.x
n
Oracle Linux 7.x
n
Red Hat 7.x
n
SUSE 12.x
l
rpmlib version should be 4.6.0-1 or higher
Every server requires 2 cores and a minimum of 3 GB available RAM.
Supported operating systems - VxFlex Ready Node R840
l
Windows 2019 , including the Visual C++ redistributable 2010 package, 64-bit. Server Core editions are not
supported.
l
Linux RHEL 7.x, SUSE 12.x
VxFlex Ready Node deployment overview
VxFlex Ready Node Operating System Installation Guide for Linux 13