Dell EMC VxFlex Ready Node - Vxflex os Data IP Network for Subnet #2; Vxflex os IP Network for 2-Layer Configuration (Data 3 + Data 4); Vxflex os Data IP Network for Subnet #1

Table 6 VxFlex OS data IP network for Subnet #1 (continued)
Item Description Comments
IP address pool
for Subnet #1
The pools of IP addresses used for static allocation for the following groups:
1. Node_DATA1_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
2. MDM_Cluster_Virtual_IP_DATA1 = the Virtual IP addresses of the MDM
cluster in the "Data1" network
For clarity, the first subnet is
referred to as "Data1"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA1_IP+MDM_Cluster_Virtual_IP_DATA1
Table 7 VxFlex OS data IP network for Subnet #2
Item Description Comments
N Number of nodes
IP address pool
for Subnet #2
The pools of IP addresses used for static allocation for the following groups:
1. Node_DATA2_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
2. MDM_Cluster_Virtual_IP_DATA2 = the Virtual IP addresses of the MDM
cluster in the "Data2" network
For clarity, the second
subnet is referred to as
"Data2"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA2_IP+MDM_Cluster_Virtual_IP_DATA2
Table 8 VxFlex OS IP network for 2-layer configuration (Data 3 + Data 4)
Item Description Comments
N Number of nodes
IP address pool
for Data 3
The pool of IP addresses used for static allocation for the following group:
l
Node_DATA3_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
For clarity, the second
subnet is referred to as
"Data3"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA3_IP
Item Description Comments
N Number of nodes
IP address pool
for Data 4
The pool of IP addresses used for static allocation for the following group:
l
Node_DATA4_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
For clarity, the second
subnet is referred to as
"Data4"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA4_IP
Network architecture and physical connectivity for Linux servers
VxFlex Ready Node Operating System Installation Guide for Linux 31